PORSCHE CAYENNE DIST CAP
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Use this clip to renew the appearance of your original Bosch distributor. Screws provided are slightly different than originals. Bosch 1 237 011 007
Distributor cap, for cars with die cast aluminum distributors.
View/Change Diagram
From $19.90
Make a selection
The .009 distributor is a must for carburetion, as its centrifugal advance provides faster acceleration. it comes complete with points, condenser, distributor cap, and is easy to install.
General Fitment 914 1970-76
From $84.50
Make a selection
Brombacher 997 tt stainless steel race pipes
Facts:
- + 35 crank hp & + 25 crank torque
- 3" tubing (75mm) that tapers down to 2.25" (57mm) to prevent turbo damage.
- weighs 7 lbs. (3,1 kg)
- t 316 stainless steel for improved durability over t 304.
- bolts up to the turbochargers, replacing both the cats and the muffler.
- reduces turbo lag and backpressure.
- exhaust tips are not included! Stock tips will fit.
- intoxicating growl at idle, partial throttle and wide open throttle.
- made in Germany
- programming or o2 sensor simulators are necessary, as the lack of catalytic converters will throw the check engine light. (see part numbers below)
Figures:
Genuine:
Engine - 6 cylinder...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $456.50
Make a selection
"brombacher" 996 GT2 titanium exhaust system with 200 cells titanium tri-metal catalytics.
Facts:
- + 25 crank hp & + 19 crank torque
- 100-105 db sound level
- cat bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 26 lbs. (11,9 kg)
- 2 x 3.5"(90mm) titanium tips
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- dme programming necessary.
Figures:
Genuine:
Engine - 6 cylinder boxer twin-turbo (based on 6 speed)
Capacity - 3600ccm
Compression ratio - 9,0:1
Max. Power - 353kw (480hp) @ 6000rpm
Max. Torque - 620nm (457lbf ft) @ 1950-500...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$8,712.00
Make a selection
Stoptech rear 13 inch 4 piston big brake kit Porsche 993 Carrera 93-98
Stoptech big brake kits give your vehicle that supercar look and feel, and exceed stock brake system performance in two areas. First, larger rotors increase heat capacity. A brake system?s biggest enemy is heat. A brake system with inadequate heat capacity will overheat leading to brake fade, increased stopping distances, and possible failure. Second, stiffer calipers and stainless steel lines reduce system compliance and increase initial bite and pedal feedback. The key is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front t...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
$2,694.60
Make a selection
Our replacement oil filler and power steering caps are cnc machined from billet aluminum, thermo coated with a wrinkle black finish and are accented with stainless steel allen screws. Our exclusive caps will add a distinguished look and style to your engine compartment. Available with the OEM "oil can" engraved logo.
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 2005-08
This is the small plug next to the distributor cap that when removed, allows inspection of the cam belt timing mark
Known as: stopper
View/Change Diagram
From $3.99
Make a selection
Stoptech front 14 inch 4 piston big brake kit Porsche 993 Carrera 93-98
Stoptech big brake kits give your vehicle that supercar look and feel, and exceed stock brake system performance in two areas. First, larger rotors increase heat capacity. A brake system?s biggest enemy is heat. A brake system with inadequate heat capacity will overheat leading to brake fade, increased stopping distances, and possible failure. Second, stiffer calipers and stainless steel lines reduce system compliance and increase initial bite and pedal feedback. The key is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front ...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98
$3,126.60
Make a selection
This is the gasket that fits in between the distributor cap and the distributor base on all 944 models to seal out the water. an easy peel and stick installation.
Known as: sealing sleeve
View/Change Diagram
For over thirty years, the ignitor has proven itself in applications ranging from race cars to tractors. The ignitor replaces breaker point and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ignition system. The ignitor has been called the “stealth” ignition because of its quick installation and nearly undetectable presence under your distributor cap.
The ignitor ii has many of the same great feature that the ignitor has, but its smarter. Ignitor ii units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire rpm range. Ignitor ii systems develop up...(choose a part on the right to read more)
General Fitment 911 1965-69 930 1975-77 911 1974-77 911 1970-73
Stoptech rear 13 inch 4 piston big brake kit Porsche 964 Carrera 91-94
Stoptech big brake kits give your vehicle that supercar look and feel, and exceed stock brake system performance in two areas. First, larger rotors increase heat capacity. A brake system?s biggest enemy is heat. A brake system with inadequate heat capacity will overheat leading to brake fade, increased stopping distances, and possible failure. Second, stiffer calipers and stainless steel lines reduce system compliance and increase initial bite and pedal feedback. The key is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front t...(choose a part on the right to read more)
General Fitment 911 1989-94
$2,694.60
Make a selection
"brombacher" stainless steel exhaust system with valves for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
The stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$9,992.40
Make a selection
Exhaust system with valves for the 997 -08
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 21 hp & + 12 lb.-ft torque gain with exhaust system only. Based on 997s.
- weighs 62 lbs.(28,0 kg).
- includes valves for stock sound and a true GT3 cup like race sound!
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning (incl...(choose a part on the right to read more)
General Fitment 911 2005-08
$9,385.20
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 36 lbs. (16.5 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips are not included! Stock...(choose a part on the right to read more)
General Fitment 911 2005-08
$5,130.40
Make a selection
"brombacher" stainless steel exhaust system for the 997-2
Facts:
- equal length headers with long tube design
- 200 cell German hjs sport catalysts with "u torque" design
- 2 3/4" tubing (70mm)
- sealing cone style connections and quick release clamps
- 4 x 3.5"(90mm) round tips
- made in Germany
-+ 28 hp & + 20 lb.-ft torque gain with exhaust system only.
- weighs 72 lbs.(33,0 kg).
the stock system weighs 84 lbs (38 kg), savings is 12lbs (5 kg).
Figures:
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/...(choose a part on the right to read more)
General Fitment 911 2009-12
From $7,994.80
Make a selection
Consists of the parts necessary for a complete and professional tuneup! Air filter, oil filter, spark plugs (the expensive w4dpo variety), valve cover service kit, distributor cap, rev limiting rotor, fuel filter, ignition points and alternator belt.
General Fitment 914 1970-76
Brombacher (sound version) stainless steel mufflers
Facts (based on 997s):
- + 5 crank hp & + 2 crank torque
- 2 1/2 (63.5 mm) diameter tubing (reduces thermal stress)
- weighs 33 lbs. (15,0 kg)
- t 316 stainless steel for improved durability over t 304
- factory stamped for true Porsche sound
- made in Germany
- intoxicating growl at idle, partial throttle and wide open throttle
- reuses factory tips or any aftermarket tip designed to fit OEM exhaust. (3.6l mod. Need 3.8l tips)
- no dme programming necessary
Figures (based on 997s):
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 440...(choose a part on the right to read more)
General Fitment 911 2009-12
$2,581.70
Make a selection
Brombacher 997 tt (sound version) stainless steel exhaust system
Facts:
- + 25 crank hp & + 19 crank torque (with FVD software) **
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- 98db at idle and partial rpms, 100 db at wide open throttle
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- no dme programming necessary.
Please note:
Exhaust tips ar...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12
$4,969.80
Make a selection
Brombacher 997 tt (super sound version) stainless steel exhaust system
Facts:
- + 35 crank hp & + 25 crank torque (if pressure sensor is adjusted via software)**
- catalytic bypass
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 51 lbs. (23,0 kg)
- t 316 stainless steel for improved durability over t 304
- cone style catalytic connection design to prevent exhaust leaks
- includes quick release clamps
- made in Germany
- modular design for 100 cell, 200 cell or bypass use
- intoxicating growl at idle, partial throttle and wide open throttle
- dme programming necessary.
Please note:
Exhaust tips are not included! Stock tips will fit.
The tips pictured above can be purcha...(choose a part on the right to read more)
General Fitment 911 2005-08 911 2009-12 911 TURBO/GT2 2007-09
$2,117.50
Make a selection
Sonax gloss shampoo concentrate is a highly effective, phosphate free formula that penetrates and loosens tough dirt without damaging or stripping the protective layer. The special anionic surfactants within, simultaneously adhere and distribute dirt particles and act as emulsifiers absorbing and dissolving oil droplets. Sonax gloss shampoo concentrate is safe for all finishes and leaves a brilliant, clean shine to your paint surface every time! Simply mix two capfuls of shampoo concentrate into a 5 gallon bucket and fill with clean water.
General Fitment ACCESSORY
These beautifully crafted billet aluminum oil filler and power steering caps will add a distinguished look and style to your engine compartment. These machined caps are available in a satin silver with black allen screws. The oil cap replaces the original cap and is engraved with the OEM "oil can". The power steering cap gets installed over the OEM cap with a set screw and is engraved with the OEM information "pentosin chf 11s". These caps fit Porsche models 986, 996, 996tt, 987. Sold as a pair.
General Fitment BOXSTER 1997-04 BOXSTER 2005-08 CAYMAN 2006-08 911 1998-05 911 2005-08
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|